Eurotherm 5100e, Руководство пользователя

Страница: 38 / 136

100 MM GRAPHICS RECORDER: USER GUIDE
HA027271
Issue 12 Mar 04
User Guide
Page 34
4 SETTING UP THE RECORDER
As described in the ' Access to Configuration ' (section 3.3.1) above, the setting-up of the recorder is divided into the
following areas:
Archive Section 4.1 - Allows manual archiving of data to disk or (if the Ethernet option is fitted) to a remote
host ( FTP transfer ).
Save/restore Section 4.2 - Allows new configurations to be created and saved, and saved configurations to be 're-
stored'.
Config Section 4.3 - This is the major channel/alarm/option etc. area of configuration.
Security Section 4.4 - Allows passwords to be entered and edited and allows the Engineer-level password
holder to enable/disable areas of configuration to Operator-level password holders. New users can be
added, with their own user names, passwords and access level permissions.
Network Section 4.5 - This area sets up the IP address/host names etc. used in FTP transfer, Remote Viewer and
SNTP applications (if the Ethernet option is fitted).
System Section 4.6 - Allows:
Time and date functions to be set and edited (including daylight saving start and finish dates, time
zones etc.)
Display language to be chosen
Option key codes to be entered
Inputs to be adjusted.
System contains an 'About' screen describing the software/hardware status of the recorder.
Section 4.7 describes the various job categories available to the user
Note: In all the following descriptions, if a change is made to a menu item, then the item text changes from
black to red, until it is 'saved'.