Eurotech Zypad ZRS-2D, Руководство пользователя, Страница: 36 / 44

36 ZRS-2D User Manual
The Software
Two programs are available on the supplied CD-ROM in path \Software\WL11xx as follows:
ZyBar2D.exe
The ZyBar2D program, once installed and set up, emulates manual keystrokes and provides the
scanned data for any active application.
ScanSet2D.exe
The ScanSet2D program allows the user to setup the ring scanner with some useful options that can
make barcode acquisition easier and more efficient. For example, it is possible to add prefixes/suffixes
such as carriage returns or line feeds to eliminate manual keystrokes.
Note:
•
It is recommended to store the ZyBar2D.exe and
ScanSet2D.exe programs in the same directory. Otherwise
these programs may not work.
•
The two programs ZyBar2D and ScanSet2D use the same
serial port and it is no possible to use them at the same time.
Note:
Microsoft ActiveSync is the synchronization software recommended
for transferring and synchronising files between the WL11xx and a
Host PC running Windows XP.
ActiveSync 4.0 or greater is required
For further information, refer to the Zypad WL11xx User Manual.
INSTALLING AND RUNNING THE SOFTWARE ON THE ZYPAD WL11XX
1. Ensure that the Zypad WL11xx is turned on.
2. Connect the Zypad WL11xx to the Host PC through the client USB cable. The Active Sync
program will advise the user about the state of the connection. Tap the “Explorer” button at
the top of the Active Sync window (or select “Explorer” from Start > All Programs >
Accessories > Windows Explorer). The Zypad WL11xx should be detected as a “Mobile
Device”.
3. Copy the ZyBar2D.exe and ScanSet2D.exe files from the CD-ROM to the “Mobile Device”
folder on the Zypad WL11xx.
4. Disconnect the Zypad WL11xx from the PC.
5. Connect the ZRS-2D to the WL11xx.