2009
EUROTECH USER MANUAL
VoIP
2
All
™
Series: 8
❘
16
❘
24 Channel Gateway User Manual
15
Chapter 3.4: Internal SIP Server
The Gateway has an internal SIP Server that is able to register up to 32 SIP clients. This SIP client
can be: a VoIP phone, or external SIP Servers or IP PBX.
By default the Internal SIP Server works without authentication, you can register with no
password and you can choose any user name. The user name should be a number.
Registering a VoIP phone in the Internal SIP Server
1. Open the configuration page of the SIP phone.
2. Set up the following registration parameters:
The "SIP Server IP Address" - the IP address of the gateway.
The "SIP User ID" - the chosen number for this extension (any number).
The ‘Authentication Password’ – may be left empty.
3. Save settings.
4. Register with the new account.
5. In the VoIP
2
ALL PC management, open the 'SIP Status' window to see the SIP phone
registered.
Fig: Ex. Two SIP clients registered in the internal SIP.
Chapter 3.5: Working with a local SIM
For each cellular port there is one dedicated local SIM. This SIM can work only with that cellular
port. There are two basic modes of working with the local SIM:
Active by Default - local SIM will register in the cellular network automatically when inserted.
Work by Timetable - local SIM will register in the cellular network only when set at the time
table.
Setting the Local SIM to be active by default
In this mode the local SIM will register in the cellular network automatically when inserted in the
SIM socket.
1.
Open the 'ports' window.
2. On the left you will see list of all the ports, select 'General.'
3.
Set the 'Default SIM' parameter to 'Work by Default'
4. Insert the SIM to the cellular port’s local SIM socket.
5.
Open the 'Monitor' to view the status of the cellular ports.
All manuals and user guides at all-guides.com
