2009
EUROTECH USER MANUAL
VoIP
2
All
™
Series: 8
❘
16
❘
24 Channel Gateway User Manual
11
Insert the SIM cards as follows:
·
Each SIM Server card has 32 SIM card chambers.
·
The chambers are marked from 1 to 32.
·
To open the chamber, gently push the metal housing in and lift the metal housing up
from the tab labeled ‘lift’.
·
Position the SIM in the chamber, so the SIM metal contacts face downward and the
snubbed triangle to the right.
·
Push the metal housing down towards the card.
·
Slide the metal housing back into the ‘locked’ position.
·
The SIMs now is in place.
·
Repeat for each SIM.
Fig: Inserting SIM in SIM Server card.
Chapter 1.3: Connecting the Cables
There are two sets of LAN and COM connectors on the master card marked ST1 and ST2. The
VoIP
2
ALL currently use only the ST1 connectors on the left. (ST2 connectors on the right are in
use only in 24 channels VoIP2ALL gateways.)
·
LAN cable - The LAN cable is used to connect the system to the internet network.
Connect the LAN line to the left RJ-45 marked LAN (the right RJ-45 marked LAN is used
only in 24 channels VoIP2ALL gateways ).
·
Antennas – Connect one antenna for each four (4) channels. Position the antennas at
least 20 centimeters apart and more then 1.5 meters from the VoIP
2
ALL.
·
Power Supply Cable - Connect the power supply cable from your 110-240V 50-60Hz
power outlet to the VoIP
2
ALL Gateway power connector.
·
Com Cable – Connect the Com Cable from the PC RS-232 comport to the left RJ-45
marked COM (the right RJ-45 marked COM is used only in 24 channels VoIP2ALL
gateways). The com connection is not essential for day to day use.
All manuals and user guides at all-guides.com
all-guides.com
