Vector - User Manual
8
110124-7000A
RoHS
This device, including all it components, subassemblies and the consumable materials that are an
integral part of the product, has been manufactured in compliance with the European directive
2002/95/EC known as the RoHS directive (Restrictions on the use of certain Hazardous Substances).
This directive targets the reduction of certain hazardous substances previously used in electrical and
electronic equipment (EEE).
Technical Assistance
If you have any technical questions, cannot isolate a problem with your device, or have any enquiry
about repair and returns policies, contact your local Eurotech Technical Support Team.
See
Transportation
When transporting any module or system, for any reason, it should be packed using anti-static material
and placed in a sturdy box with enough packing material to adequately cushion it.
Warning:
Any product returned to Eurotech that is damaged due to inappropriate packaging will not be covered by the
warranty.
Conventions
The following table describes the conventions for signal names used in this document.
Convention
Explanation
GND
Digital ground plane
#
Active low signal
+
Positive signal in differential pair
-
Negative signal in differential pair
The following table describes the abbreviations for direction and electrical characteristics of a signal
used in this document.
Type
Explanation
I
Signal is an input to the system
O
Signal is an output from the system
IO
Signal may be input or output
P
Power and ground
A
Analog signal
OD
Open-drain
CMOS
3.3 V CMOS
LVTTL
Low Voltage TTL
3.3
3.3 V signal level
5
5 V signal level
HDA
High Definition Audio signal, 3.3 V (default) or 1.5 V
LVDS
Low Voltage Differential Signalling
NC
No Connection
Reserved
Use is reserved to Eurotech
