Eurotech TRV602 NF, Инструкция по использованию, установке и обслуживанию

Страница: 8 / 16

TECHNICAL INSTRUCTIONS
FOR THE INSTALLER
Installation, transformations and maintenances
below listed, may only be carried out by a
competent technician.
The appliance must be correctly installed in
conformity with current law and the
manufacturer's instructions.
A wrong installation may provoke damages to
persons, animals or things, for which the builder
can not be responsible.
Throughout the life of the system, the devices
for the safety and automatic regulation of the
appliances must only be modified by the
manufacturer or the duly authorised supplier.
3) INSERTING
After having cleared out all the packing components,
make sure of the integrity of the appliance.
If you are in any doubt, do not use the appliance
and contact qualified personnel.
The packing elements (cardboard, bags,
polystyrene, nails...) must not be left within the
reach of children as they are potential sources
of danger.
Make a cutout in the worktop, according to the
dimensions indicated in fig. 5; make sure that will be
respected the critical dimensions of the space in
which the appliance has to be installed (fig. 5 - 6).
In order to avoid accidental contact with the surface
of the box of the overheated hob during use, it is
necessary to install a wooden divider at a minimum
distance of 120 mm from the top, fastening it in
place with screws (fig. 5).
COMPLY WITH THE DIMENSIONS (mm)
FIG. 5 FIG. 6
INSTALLATION
A B C D E
2 EL. 282 482 59 59 60 min.
8
CAUTION:
do not place the glass directly on the unit.
The bottom of the hob must rest on the unit.