background image

 

25

Hints and Tips                                                             

Problem

 

Possible causes

 

What to do

 

The induction hob 
cannot be turned on.

 

No power. 
 

Make sure the induction hob is 
connected to the power supply 
and that it is switched on. 
Check whether there is a power 
outage in your home or area. If 
you’ve checked everything and the 
problem persists, call a qualified 
technician.

 

The touch controls are 
unresponsive. 
 

The controls are locked. 
 

Unlock the controls. See section 
‘Using your induction cooktop’ for 
instructions. 

The touch controls are 
difficult to operate. 

There may be a slight film of 
water over the controls or you 
may be using the tip of your 
finger when touching the 
controls. 

Make sure the touch control area is 
dry and use the ball of your finger 
when touching the controls. 

The glass is being 
scratched. 
 

Rough-edged cookware. 
 
 
 
Unsuitable, abrasive scourer or 
cleaning products being used. 

Use cookware with flat and smooth 
bases. See ‘Choosing the right 
cookware’. 
 
See ‘Care and cleaning’. 
 

Some pans make 
crackling or clicking 
noises. 
 

This may be caused by the 
construction of your cookware 
(layers of different metals 
vibrating differently). 

This is normal for cookware and 
does not indicate a fault. 
 

The induction hob 
makes a low 
humming noise when 
used on 
a high heat setting. 

This is caused by the 
technology 
of induction cooking. 
 

This is normal, but the noise should 
quieten down or disappear 
completely when you decrease the 
heat setting. 

Fan noise coming 
from the induction 
hob. 

A cooling fan built into your 
induction hob has come on to 
prevent the electronics from 
overheating. It may continue to 
run even after you’ve turned 
the 
induction hob off. 

This is normal and needs no action. 
Do not switch the power to the 
induction hob off at the wall while 
the fan is running. 
 

Pans do not become 
hot and appears in 
the display.

 

The induction hob cannot 
detect the pan because it is not 
suitable for induction cooking. 
 
The induction hob cannot 
detect the pan because it is too 
small for the cooking zone or 
not properly centred on it. 

Use cookware suitable for induction 
cooking. See section ‘Choosing the 
right cookware’. 
 
Centre the pan and make sure that 
its base matches the size of the 
cooking zone.

 

Содержание ED-IFZ 604
































Отзывы: