Eurotech DuraMAR 2150, Руководство пользователя

Страница: 22 / 38

DuraMAR 2150 – User’s Manual
Commands reference
The following table lists the available commands for configuring the HSDPA interface:
description
Adds a text description for the interface
Sets the IP Maximum Transmit Unit (MTU)
mtu
Forces the TCP maximum segment size for the sessions entering
or exiting from the interface
tcpmss
The interface will be used as default gateway
defaultroute
Defines the Access Point Name (APN) for the PDP context
apn network_name
Username to use during authentication. Do not use this if the
wireless operator does not require any authentication
username
username
password
password
Password to use for authentication. Do not use if the wireless
operator does not require any authentication
Enables bridge service on this interface.
•
bridge static performs the proper setup of the PPP link. The
Ethernet interface of the controller and of the router must be
manually configured
pppbridge
ifname [ static | dynamic ]
•
bridge dynamic performs the proper setup of the PPP link
and makes the public IP address from the wireless provider
available to the router interface using DHCP protocol. The
IP address of the router should be configured to use DHCP
Enables Network Address Translation on outgoing traffic. The
source address of all of the packets sent though the PPP link will
be changed to the address of the PPP link itself. Function not
available if
bridge dynamic is used
nat
Forces the type of cellular network to be used
mode [ auto | 2G| 3G ]
Activates the specific interface
enable
22