Eurotech CPU-1474, Руководство пользователя, Страница: 35 / 50

CPU-1474/84 User Manual
34 CPU-1474/84_UserMan_En_2.0
Other “Boot Options”
Feature Options Description
POST Errors:
•
Disabled
•
Enabled
Pauses and displays SETUP entry or resume boot
prompt if error occurs on boot. If disabled, system
always attempt to boot
SETUP prompt:
•
Disabled
•
Enabled
Displays SETUP entry prompt on boot;
Disabled doesn’t prevent setup entry
Legacy USB Support:
•
Disabled
•
Enabled
Enables support for legacy Universal Serial Bus
Summary screen:
•
Disabled
•
Enabled
Displays system configuration on boot
QuickBoot Mode
•
Disabled
•
Enabled
Allows the system to skip certain tests while booting
Console Redirection
Feature Options Description
Com Port Address
•
Disabled
•
On-Board COM A
•
On-Board COM B
If enabled, it will use a port on the motherboard
Baud Rate
•
List of available rates
Enables the specified baud rate
Console Type
•
List of available types
Enables the specified console type
Flow Control
•
None
•
XON/XOFF
•
CTS/RTS
Enables Flow Control
Console connection:
•
Direct
•
Via modem
Indicates whether the console is connected directly to
the system or a modem is used to connect
Continue C.R. after POST
•
Off
•
On
Enables console redirection after OS has loaded
I/O Device Configuration
Feature Options Description
•
Serial Port A (Serial 1)
•
Disabled / Enabled / Auto
Configure Serial Port A (Serial 1)
o
Base I/O address:
•
List of available addresses
Set the base I/O address for Serial Port A (Serial 1)
o
Interrupt:
•
List of available IRQs
Set the base interrupt for Serial Port A (Serial 1)
•
Serial Port B (Serial 2)
•
Disabled / Enabled / Auto
Configure Serial Port B (Serial 2)
o
Mode:
•
RS232 / RS485 / RS422 / Off
Set the mode for Serial Port B (Serial 2)
o
Base I/O address:
•
List of available addresses
Set the base I/O address for Serial Port B (Serial 2)
o
Interrupt:
•
List of available IRQs
Set the base interrupt for Serial Port B (Serial 2)
•
Parallel Port:
•
Disabled / Enabled / Auto
Configure Parallel Port
o
Mode:
•
List of available modes
Set the mode for Parallel Port
o
Base I/O address:
•
List of available addresses
Set the base I/O address for Parallel Port
o
Interrupt:
•
List of available IRQs
Set the base interrupt for Parallel Port
•
Floppy disk controller:
•
Disabled / Enabled / Auto
Configure the Floppy disk controller
Base I/O address:
•
Primary / Secondary
Set the base I/O address for the Floppy disk controller
Watchdog Configuration
Feature Options Description
Watchdog
•
Disabled
•
Enabled
Enables /Disables the Watchdog timer
Timeout
•
Adjust the value
Adjust the timeout value
Time Unit
•
Seconds
•
Minutes
Select the time unit to be used for the watchdog timer