Mechanical
ReliaCELL 10-20 User Manual
8
110128-90021, preliminary
Mechanical
The ReliaCELL 10-20 is designed to bolt to a flat surface, connecting electrically into a recessed USB 2.0 socket.
The compression gasket creates an IP67 seal with the mating surface.
Dimensions
The following are the physical dimensions in inches and [millimeters].
Some models do not include DIV or GPS connectors.
Full mechanical models are available on Eurotech's support site.
Mating Connectors
The ReliaCELL 10-20 can connect to USB 2.0 sockets in a variety of configurations.
PWB Mount
A typical installation will mount a right-angle USB socket on a PWB inside the enclosure. The PWB may be your
main board or an adapter board, and is mounted to bring the USB socket flush with the outside of the enclosure.
Panel Mount Cable
If your application requires a panel-mounted cable solution, make sure that the mounting screws or hardware do
not extend into the ReliaCELL 10-20 gasket.
The L-com ECJ504B-UA USB jack is one solution, using spacers to provide a flush mount of the socket. The L-
com USBAFT Field Termination connector is another suitable product for retrofit applications.
