This document is property of Euroscreen Srl.
Any distribution, reproduction, copying or publication of this document is prohibited.
Installation and maintenance manual
Motorized screen GIOTTO
When the screen it has reached the end of its life it has to be put out of order and
it has to be dismantled.
To carry out these operations, please refer to the notes here under:
If the screen will be stored, before the dismantling, it is necessary to make it
useless in the following way:
- Disconnect it from the mains;
- Put the lift in the original box;
- Put on the box the following note:
“CAUTION: DO NOT USE THIS MACHINE
PRODUCT TO BE WASTED”
Before starting wasting the screen, please check that it is disconnected from the
mains.
In case the screen is still connected, disconnect it from the mains.
When wasting it, it is necessary to divide the plastic parts from the electrical
components in order to waste them properly following the recycling norms.
As regards the mechanic parts of the screen, it is suggested to divide steel parts
from other metals or alloys parts so that they can be sent for a proper recycling
process.
Dismantling the screen, please pay attention to all heavy metal parts in order to
avoid crushing.
Wasting of the components have to be carried out according to the laws in force
in the country where the screen is installed.
In any case, EC Directives have to be followed:
-91/156/CEE waste
-91/689/CEE dangerous waste
-94/62/CE
packaging and packaging waste
These procedures have to be followed in order to recycle and waste in the
best way all the components and to avoid dangers for health and environment,
specifically avoiding:
-dangers for water, air, soil, fauna and flora;
-noises and smells;
-damages to landscape and to cultural places based on the norms in
force.
6.1
WASTE
6.0 OUT OF ORDER
