20mm
20mm
This document is property of Euroscreen Srl.
Any distribution, reproduction, copying or publication of this document is prohibited.
Installation and maintenance manual
Motorized screen GIOTTO
Audience side
Screw a bolt to the bar and insert a
washer.
Before screwing the threaded bar,
make sure that between the thread
and the washer there is a minimum
distance of 20 mm.
Screw the threaded bars in the ceiling
fixing plates, making sure that the
thread is inserted through all the depth
of the plate (10 mm).
Then, clamp the bolts.
In order to install the screen’s housing, proceed as shown below:
Screw the bolts to the threaded bars.
Before installing the housing, make
sure that the distance between the nut
and the end of the threaded bar is at
least of 20 mm.
Lift up the housing and insert for 13
mm. the threaded bars inside the
holes of the side plates of the housing.
After that, insert the upper and
lower washers and the nuts M8 and
tightened them firmly.