SANDBLASTER 0701AREN10MAS
9
never exceeded (6 kg/cm
2
). If it is exceeded, the valve will be discharged and the excess
pressure will be released.
The manipulation of the safety valve or its seal is forbidden. Any valve alteration can
cause serious injuries to the user and alter the correct device performance.
EUROPE PROJECTION
is exempt from any responsibility arising from any
manipulation of the valve carried out by the user, declining in him all responsibility.
5.6.2. DEPRESSURIZATION SYSTEM
The sandblaster is equipped with a pilot three-way valve
[Exploded view 2
– Position 41]
located inside the regulation box
[Exploded view 1
– Position 4]
. The pneumatic remote control
system
[Exploded view 1
– Position 9]
has been designed so that with no piloting signal (the gun
trigger
[Exploded view
– Position 58]
is released), the air supply line to the tank is closed, leading at
the same time to its depressurization through the non-return valve installed on the top of the
equipment
[Exploded view 1
– Position 20]
.
6. INSPECTION AT RECEPTION
Before using the equipment, we have to make sure that it has not suffered any
damage during transport or storage. Moreover, we have to check that all the components and
accessories that are part of the equipment are inside the package.
The basic equipment includes the following components:
Sandblaster unit (tank with wheels, lid, regulation and safety valve systems)
Carrying handle
Gun
Tungsten carbide nozzle
2 mm
5 m product hose
10 m pneumatic remote control circuit (5 m to the gun+ 5 m return)
Hopper with extension
Identification plate
Instructions and maintenance manual
Gloves
Basic protection mask
Disposable cellulose hood (2 units)
Hearing protection earplugs
You have to check that the serial number on the equipment matches with the one
appearing on the delivery document.
7. INSTRUCTIONS FOR USE
WARNING:
Once the gun trigger is released
[Exploded view 2
– Position 58]
, wait about 10 seconds to
ensure that tank depressurization process has been completed.