background image

User manual - Mixpro 14 

202201-553-ENG

P10

4. USE OF THE MACHINE 

4.1. PREREQUISITES

• 

The electric connection has to be 230 V - 16 A - 50 or 60 Hz with a 3 x 2,5 mm² cable reel of 40m 

maximum, completely unreeled.

• 

One push on the MANU/AUTO button (2) makes the pump start working and the (L2) light lights up. 

•  One push on the button REVERSE (3) makes the product pump turn in reverse mode and the light (L4) 

lights up.

•  The buttons (4) and (5) are used to adjust the speed of the product pump.

• 

When using powdered product, pressing the WATER BACK button (6) causes water to flow into the 
mixing chamber. This function should only be used when starting up the machine before putting in the 
first bag of powdered product. 

• 

In AUTOMATIC mode with water (light (L5) on), the opening of the lance or the start command causes 
the machine to start. The automatic cycle manages the operation of the product pump, the water pump 
and the water supply to the mixing chamber.

STARTING / STOPPING THE MACHINE

•  Once the machine plug is connected, the machine is in stop mode, the display (P) indicates OFF.
• 

When the ON/OFF button (1) is pressed, the display (P) indicates the product flow rate setting value, 

the light (L1) lights up, the machine is in operation.

• 

Pressing the ON/OFF button (1) when the machine is in operation (light (L1) is lit) the machine switches 

to stop mode, the display (P) indicates OFF (light (L1) is off).

• 

Pressing the button (7) allows the machine to be operated with or without water.

• 

When the light (L5) is on, the machine is in continuous mixing mode with water (for powder products).

• 

When the light (L5) is off, the machine is in no-water mode (for pasty products).

Never use petroleum-based products in the pump, as they may damage it.
Never run the pump without water or product.

Before each use of the machine, check that the water pump is not stuck, as this could 

damage the machine. Using a flathead screwdriver, turn to loosen the propeller of the water 

pump (see below).

Содержание 30760





















Отзывы: