SANDBLASTER 0701AREN10MAS
11
8. COMPONENTS DISMANTLE
Next, we describe how to procceed to tasks related with dismantling or substitution of
equipment components that, to
EUROPE PROJECTION
´s
discretion, are considered
usual and can be made by the user.
To do other types of dismantling actions, it is neccessary to count on your
SAT- Official
Technical Service
8.1. TIPS DISMANTLE
To dismantle the tip of the gun
[Spare parts 2
– Posit.28]
to clean it or substitute, you must
proceed as follows:
To disconnect the equipment from the air pressure feeding.
To unscrew the tip nut
[Spare parts 2
– Posit.51]
out of the adaptor
[Spare parts 2
–
Posit.50]
attached to the product hose.
To quit the tip
[Spare parts 2
– Posit.52]
out of the tip nut
[Spare parts 2
– Posit.51]
.
To place the tip, you must do the steps below vice versa.
8.2. PRODUCT HOSE DISMANTLE
To dismantle the product hose
[Spare parts 2
– Posit.28],
to clean it or substitute it, you
must do the following.
To disconnect the equipment from the air pressure feeding.
To loose the clamp
[Spare parts 2
– Posit.25]
which fix the hose
[Spare parts 2
– Posit.28]
to
coupling nut
[Spare parts 2
– Posit.24]
.
To separate the hose from the coupling nut.
To assemble again the hose, you must do the steps below vice versa.
8.3. TANK TOP DISMANTLE
This operation must be only done for maintenance and periodical cleaning. Abrasive
product loading must be done through the product loading cap
[Spare parts 2
– Posit.13]
and not
through the tank top
[Spare parts 2
– Posit.2]
.
To dismantle the tank top
[Spare parts 2
– Posit.2]
, you must do as follows:
To disconnect the equipment from the air pressure feeding.
