European Water Care EWC 10, Руководство пользователя

Страница: 3 / 24

Version 1. 1/12 3
8.) 1 pack of water hardness test strips
When removed from the box, acquaint yourself with the connections at the rear of the water
softener. These are as follows:
Fig.1
1) 2 x ¾ inch BSP male connections.
a. The left one being the Mains Water Inlet
b. The right one being the Softened Water Outlet
2) A 13 mm hose barb connection on the left hand side. This is the
Drain Outlet.
3) A 3/8 inch loose pipe and elbow disappearing into the brine tank cabinet Figs.2 & 3. This
is the
Brine Pick Up and is left lose for transportation . This immediately requires connecting
to the push fit elbow on the left hand side of the control valve (see below). Lubricate the end
of the tube with a little water and push firmly into the push fit elbow.
Note: If you can easily
pull this out, you
didn’t
push it home firmly enough.
Fig.2
Fig.3