Document ID: 33080000
Rev: C
Technical Support: 1-800-626-6912
Page 11
P
EDICURE
S
PA
S
PECIFICATIONS
•
Hot and cold water supply lines required (hot and cold shut offs may be installed under pedicure
spa base)
•
Pedicure spa must be installed by a licensed electrician and a licensed plumber, conforming to all
local and national electrical codes
NOTE: Due to our policy of continuous improvements, all specifications are subject to change without notice.
All dimensions and weights are approximate.
S
HIPPING
I
NFORMATION
Carton Dimensions: 65”L (165cm) x 36W (84cm) x 41”H (104cm) – includes Spa, carton, and pallet
65”L (165cm) x 36W (84cm) x 53”H (135cm) – includes Spa, carton, pallet, and
accessories
Weight:
280 lbs. (119 kg) - includes spa, carton, pallet
S
PA
I
NFORMATION
Overall dimensions, seat upright and forward:
59”L (150cm) x 31.5”W (80cm) x 54”H (137cm)
Minimum area required for full chair movement:
76”L (193cm) x 46”W (117cm) x 57”H (145cm)
Empty weight (complete):
195lbs (88kg)
Water Fill Line Capacity:
4.5 U.S. gallons (17 Liters)
Whirlpool pump motor:
110V: 1/6 HP, 110V, 60Hz220V: 1/6 HP, 220V, 50/60Hz
Seat upholstery:
Polyurethane
Seat and back motors:
24V DC Linear Actuators. Spa requires 17” (44cm) of
space between pedicure spa and wall
Air Relaxation System:
12V DC, Adapter included (alternate voltages available)
Power source:
110V: 110V AC, 2.75 Amps, 60 Hz (GFCI Protected)
220V: 220V AC, 2.75 Amps, 50/60 Hz (GFCI Protected)
Construction:
Steel Frame with ABS-backed acrylic shells and basin,
pre-plumbed
Clean Touch™ Pipe-Free® Technology:
4 water massage channels, no closed loop circulating
pipes, fully drained. System employs three part
assembly that twists from the basin for easy cleaning.
Electrical switches:
On/Off switch for pump. Dual hand-held, low voltage
remote controls for massage motors and seat
forward/back position. Hot and Cold water supply lines
required.
Compliances:
Tested according to CAN/CSA-E60335-1:1994,
CAN/CSA-E60335-2-32:2001, UL 60335-1:2002, & UL
1647:2001
Electrostatic Limits:
This unit may lose one or more functions when
electrostatic contact discharge in excess of 4KV gets into
accessible conductive part of the unit and can be
restored by resetting the unit. AC input power port and
can be restored by resetting the unit. This unit may lose
one or more functions when subjected to fast transient
voltages in excess of 0.5KV at 5 KHz repetition
frequency and cannot be restored.
Limited warranty:
One (1) year on parts from date of shipment. Labor is
not included. See page 3 for full warranty.
Содержание RINATO XL SPA
Страница 1: ......
Страница 21: ...Document ID 33080000 Rev C Technical Support 1 800 626 6912 Page 21 HISTORY AND NOTES...
