Document ID: 39080000
Rev: C
Technical Support: 1-800-626-6912
Page 15 of 26
STEP 12
Assemble the chair by setting the seat cushion onto the hydraulic pedestal. Locate both armrest and
find the (L) or (R) on them. This denotes left or right. Assemble armrests to the seat cushion using
the supplied screws and Phillips screw driver. Assemble back cushion to the armrests using the
supplied screws. Place supplied caps into holes of the armrests after assembly is complete.
STEP 13
Plug transformer cord into bottom of back cushion. Plug wire from back cushion into seat cushion.
WARNING: Do not let chair rotate a full 360 degrees. The power cord may disconnect from
the chair.
STEP 14
Unpack remote and plug it into the chair, where the sear cushion and back cushion come together.
STEP 15
Secure the entire unit to the floor using the appropriate fasteners with the floor brackets.
Right
Left
