INSTALLING the BURNER
20
G Series
Linear Hearth Burner
European
Home
.com
INSTALLING THE FIRE MEDIA
Your
G Series Linear Hearth Burner
comes with two types of fire media; crushed glass or Carrara pebbles.
First install the fire media then the Embaglow.
The Fire Media
The contents of the bag of burner media should be spread to an even depth across the entire burner top.
The pilot flame should be clear of the fire media by 1/4”
Embaglow (Optional)
Note:
Embaglow contains loose metal fibers which may be sharp. You are advised to wear gloves while
installing it.
1. Remove the bunch of Embaglow from the package and tease out the fibers until they form a very loose,
very light network.
2. Once the fibers are prepared, place them where a glow is desired.
Ensure that the metal fibers are kept
away from the pilot light area as they can prevent ignition of the pilot light.
Although the fibers have a long life, they will eventually deteriorate. If this becomes apparent, replacement
Embaglow can be purchased from your local fireplace retailer or European Home.
BEFORE THE FIRST FIRE
1. Make sure all flammable materials have been removed from inside and around the fireplace.
2. Confirm that the wiring is secure.
3. Check the gas supply for leaks.
4. Confirm the proper placement of the burner media.
