EuropAce EWC 8041S, Инструкция по эксплуатации, Страница: 12 / 23

TYPES OF REGULATION
Please note that depending on the loading and settings chosen it takes about 24 hours for the
wine cellar to see the temperature stabilizing.
During this time LED seems to move erratically in particular,It is normal and this process
occurs whenever the setting is modified and/or whenever a large amount of bottles are added
to the cellar.
EWC 8041S , EWC 8871S , EWC 8121S , EWC 8171S:Both built-in and free-standing type,
sensor touch controller and LED displayer
Designed to store and mature all wines: red, white and sparkling. These wine cellars
reproduce the ideal conditions for wine storage , at a constant recommended temperature of
12ºC. They can also be set to provide ideal serving temperature for full enjoyment of the
wine’s qualities. Unless stated by the wine maker on the bottle.
TEMPERATURE SETTINGS
Important: The LED displays by default the actual internal air temperature.
The temperature settings are pre-set at the factory as follows. In the event of a power
interruption, all previous temperature settings are automatically erased and it will revert to
the preset temperature settings.
The electrical board of all models comes with memory function.
It is important to understand that there is a difference between the air temperature inside the
wine cellar and the actual temperature of the wine:
You will need to wait approximately 12
hours before noticing the effects of temperature adjustment due to the critical mass within a
full wine cellar.
Once the temperature is set, it is strongly advised not to toy with it or adjust frequently. The
thermostat will maintain the temperature inside the wine cellar within a +/- 2.5ºC range. But
the thermal inertia of the wine and the glass is such that within this temperature range, the
actual temperature of the wine will only fluctuate 0.5ºC to 1ºC.