OPERATING INSTRUCTIONS
NOTICE:
To avoid damage to the unit, ensure the product is fully assembled before plugging it into an
electrical outlet.
1. Plug the product into a standard 220-240-volt AC electrical outlet.
2. You can tilt the fan backwards from vertical, either 6 degrees or 12 degrees
(see diagram at right), in order to circulate warmer air in the room that has
risen toward the ceiling.
3. Turn on the Fan by pressing the POWER/SPEED Button on the Control Panel.
4. To set the speed of the Fan, press the POWER/SPEED Button on the Control
Panel repeatedly until the Indicator Light above the corresponding speed icon
appears: "
" for High, "
" for Medium, or "
" for Low.
NOTICE:
To avoid damaging the product, press only one Button at a time.
5. To start/stop oscillation, press the OSCILLATE Button on the Control Panel.
6. Turn off the Fan by pressing the Power Button on the Control Panel and then
unplug the product from the electricaloutlet.
WARNING
: Unplug power cord whenever fan is not being operated. Do not leave
fan unattended while it is plugged in.