PARTS
Tower Fan
Front Base
Rear Base
Bolts (4pcs)
ASSEMBLY INSTRUCTION
WARNING:
Always ensure the product is unplugged from the electrical outlet before relocating,
assembling, disassembling, or cleaning it.
1. Remove the 4 bolts from the centre bottom of the fan body.
2. Connect the Front Base and Rear Base together and attach the assembly to the underside of the Tower
using the four bolts. The base will only fit onto the Tower in one direction.
3. Place the Power Cord into the notch in the underside of the Rear Base.
4. Place the assembled Tower Fan on a flat, stable, level surface.
Battery Installation for the Remote Control:
1. Remove the Battery Compartment Cover by pressing down on it and out in the
direction of the arrow.
2. Insert two "AAA" batteries (not included) according to the polarity marking
inside the Battery Compartment and then replace the Battery Compartment
Cover.
CAUTION
: Remove the batteries when the Remote Control will not be used
for an extended period.