GB
14
START
COOKING
STOP
E1
E1
E2
D1
D1
D3
P4
P5
D2
E2
P2
Core probe (optional)
With the button
you can choose the core probe cooking mode. Therefore on
display it will be shown the core probe temperature.
After pushing button
when display
blinks you can set the core probe
temperature values by the knob
and then you confirm it pushing the knob.
The temperature value for the core probe is from 30°C up to 99°C.
If you want to change from time mode to core probe one, you have to stop the
current cycle and then, pushing the button
, set your desired cooking mode
as above described.
Upon reaching the set temperature for cooking it appears a lighting notice on
the display
with an intermittent acoustic signal. To stop the signal you have
to push a button or a knob.
P5
D2
P5
D2
E2
P5
D2
PREHEATING
The oven control gives you the possibility to set the preheating before start
cooking.
To enter the preheating, when you choose cooking time parameters, you may
push for 5 seconds the knob
until appears on the display the notice “PrE” that
indicates the preheating activation function.
With the pressure of the knob
you may enter the preheating temperature
which will be displayed on
. The end of this function is indicated with a
blinking notice and an acoustic beep.
When the preheating cycle ends, if you don't open the oven door or you don't set
up any different cooking temperature, it will be automatically saved the
preheating temperature for cooking.
E2
E1
D1
COOLING
When cooking cycle ends, you can decide for fast cooling function of the oven by
pushing for 5 seconds the knob
. On display
you will see the notice “raFF”
that shows the activation of this mode.
On display
appears the temperature that you decide for cooling; you can set
up it by pushing the knob
.
When cooling starts, a notice to open the oven's door appears on the display, to
enter the desired function.
P4
D3
D1
E1
ON/ OFF LIGHTS
It is possible, at any time, to switch ON or OFF the lights inside the oven's
cooking chamber by pressing the button
.
P2
