9
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [email protected]
Installation
CAUTION!
• Before installation, ensure the operation switch is set to OFF and the plug is
disconnected from the power supply.
• The appliance is fitted with means for disconnection from the supply mains,
having a contact separation in all poles that provide full disconnection under
overvoltage category III conditions, and these means must be incorporated
in the fixed wiring in accordance with the wiring rules.
Electrical specifications
• All wiring must comply with national electrical regulations. If you have any
questions regarding the following instructions, contact a qualified electrician.
• Check the available power supply and resolve any wiring problems
before
installing and operating this unit.
• For your safety and protection, this unit is grounded through the power cord
when plugged into a matching wall outlet. If you are not sure whether your wall
outlet is properly grounded (earthed), please consult a qualified electrician.
• The rating plate on the unit contains electrical and other technical data. The
rating plate is located on the right side of the unit. Make sure to use the correct
power supply according to the rating plate of your air conditioner.
• The air conditioner must have its own fuse or circuit breaker, and no other
device or unit should be operated on the fuse or circuit breaker.
Wiring diagram (EUR-5000WAC)
Fig. 6
CAPACITOR