11
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [email protected]
Instructions (Cont.)
Sleep mode
In Sleep mode the machine runs at low speed and all indicator lights are off,
except for the “S” indicator, which is lit at half-brightness.
Use the SPEED button to enter Sleep mode.
Press any button to exit Sleep mode.
Filter reset
The air purifier has a filter indicator built in that automatically counts the usage
time and reminds you when the filters need to be cleaned or replaced.
When you start the machine, the filter indicator begins counting the hours of
usage. It will stop counting when the appliance is shut down or is in standby
mode and resume counting when you switch it on again.
When the filter indicator has counted a total of 2000 hours, the Filter indicator
will start flashing to alert you to clean or replace the filters.
• Please refer to page 13 for instructions how to clean the filters, or to page 14
for how to purchase replacement filters.
• To clear the accumulated time after you have cleaned or replaced the filters,
press and hold the FILTER button for 3 seconds. The machine will emit a
beep sound and clear the accumulated time and the indicator will turn off.
