Euromate 482235, Руководство пользователя

Страница: 15 / 64

GB
15
Device-specific safety instructions
• The product must be standing on an even, hori-
zontal surface with clearance to all sides.
• The product may not be operated outdoors.
• Never put objects through the protective grille into
the product.
• Objects that can be pulled (e. g. curtains, plants),
must not be in the immediate vicinity.
• Never expose the product to water or other liq-
uids.
• The product must not be operated in rooms with
bathtubs, showers or swimming pools or near to
wash basins or water connections.
• Remember that moving parts may also be located
behind ventilation and venting slots.
• Symbols appearing on your device may not be
removed or covered. Signs on the device that are
no longer legible must be replaced immediately.
Read and observe the instructions for use
before using the product for the first time.
DANGER! Risk of death through electric
shock!
The use of this variant outside Swit-
zerland is not permissible for safety reasons,
as this poses a risk of electric shock or fire.
The variant of the product sold in Switzerland may
only be used in Switzerland, as it is equipped with a
Swiss plug.
You can identify the variant by means of the item
number on the product (the instructions always con-
tain
all item numbers):
• Item number Switzerland: 482280
• Item number in other EU countries: 482235
Your appliance at a glance
Note: The actual appearance of your prod-
uct may differ from the illustrations.
►
Overview – p. 2
1. Switching knob
2. Timer knob
3. Control panel
4. Fan body
5. Front base
6. Rear base
7. Power cord
Scope of delivery
•
tower fan
• base (consisting of 2 parts)
• set of operating instructions
• screw
Unpacking
– Remove all parts from the packaging.
– Check all parts are present and no defect before
assembly.
Setting up
►
Assembly – p. 3
– Pass the power cord (7) through the central gate
and firmly clamp the front base (5) with the rear
base (6), then adjust the position of fan body with
that position of the base, and fix the screws of the
base with a screwdriver
– Pass the power cord through the gap of the base.
Operation
►
Operation – p. 3
– Insert the mains plug into a mains socket corre-
sponding to the technical data.
120 minutes timer
►
P. 3, item 3
• [ON]
: timer on
• [OFF] : timer off
• [30-60-90-120] : minutes
►
P. 3, item 4
• [OFF] : to turn off the fan
• Speed selection: turn on the fan by selecting the
speed:
[1]
– Low,
[2] – Med., [3] – High
•
Oscillation
[ ]
: The speed with
[ ]
means
there is oscillation.
Cleaning
DANGER! Caution, risk of injury! Alway
disconnect to the supply main before main-
tenance.
– Turn off the product, pull out the mains plug.
– Clean the fan with a soft damp cloth. Do not
immersed the fan in water.
Storage and transport
Storing
– Store the device and any accessories in a dry,
well-ventilated place.
– In case of longer periods without operation, pro-
tect the device and its accessories against soiling
and corrosion.
Transport
– Use the original packaging to ship whenever pos-
sible.
Troubleshooting
If something stops working…
DANGER! Risk of injury! Improper repairs
can result in the product functioning
unsafely. This endangers yourself and your
environment.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Fault/malfunction Cause Remedy
Product not running. No mains voltage? Check cable, plug, socket and fuse.
Cable faulty? Contact your local vendor.