EUROM EK2K Still, Руководство пользователя

Страница: 15 / 48

15
English
Technical data
Type EK2K Still EK3K Still
Supply Voltage V / Hz 220-240 / 50 220-240 / 50
Maximum capacity Watt 2000 3000
Settings Watt Ventilate-1350-2000 Ventilate- 2000-3000
Thermostat + +
Dimensions cm 34 x 29,5 x 38 34 x 29,5 x 38
Weight kg 2,3 3,1
General safety instructions
1.
Before using the machine, carefully read this entire
instruction manual
. Keep this booklet in a safe place for reference.
2.
Before using your new heater, check it, including cord and
plug, for any visible damage
. Do not use a damaged heater, but send it
back to your dealer for replacement.
3.
This heater is exclusively intended to heat workspaces such
as workshops, garages and storage spaces
. Use the appliance for
this purpose only.
4.
This heater in not suitable for use in wet or damp spaces
such as bathrooms and laundry rooms
. Do not place the heater in the
vicinity of taps, bathtub, shower, pool, fountains or other sources of moisture.
Make sure it cannot fall into water and prevent water from getting into the heater
itself. If, at any time, the heater does fall into water, unplug it immediately! Do not
use a heater that has a damp interior but have it repaired. Never immerse the
heater, cord or plug in water and never touch it with wet hands.
5.
The supply voltage and utility frequency, specified on the
machine, need to match those of the socket that is used.
The
electrical installation needs to be protected by a residual current device (max. 30
mAmp). Only connect the heater to an earthed socket!
6.
Fully extend the cord before plugging in the heater. Make
sure it does not come into contact with any part of the heater
and prevent it from heating up any other way
. Do not run the cord
underneath carpeting; do not cover it with mats, carpet strips or similar and make
sure it is not placed in any passageways. Make sure the cord cannot be stepped
on and that no furniture is placed on top of it. Do not lead the cord around sharp
corners and do not roll it up too tightly after use!
7.
If possible, do not use an extension cord, as this poses the
risk of overheating and fire
. If the use of an extension cord is
unavoidable, then make sure it is an undamaged, approved extension cord with a