31
31.
Set the ON/OFF switch to the ON position
(Figure 15, pos. 1).
32.
The display (Figure 15, pos. 2) will show OFF.
33.
Press the ON/OFF button.
34.
Press and hold the SET button until the ON-
button from display the 1 will start flashing.
35.
Use the plus and minus button to select the
correct day and confirm with the SET button.
36.
Use the plus and minus button to set the
correct time:
•
Hours, confirm with the SET button;
•
Minutes, confirm with the SET button.
37.
Press the MOD button to choose the desired
function: manual or program.
Figure 15
Modes
The Alutherm Sani WiFi has several operating modes:
•
P-mode: the desired ambient temperature can be set. The heater will stop heating when
the desired temperature is reached. The heater will start heating again when the
ambient temperature is below the desired temperature.
•
M-Mode: the desired ambient temperature cannot be set. The heater will heat
continuously.
Both the P-mode and M-mode can be used with low and high heating capacity.
Use the Mode button on the control panel to switch between 3 modes (in sequential order):
1.
The device will always start in: P-mode high heating capacity.
2.
P-mode low heating capacity.
3.
M-Mode high heating Capacity.
In M-mode, the heating capacity can be changed with
the ‘+’ and ‘
-
‘ on the
control panel.
Use the remote control to switch between 4 modes:
1.
Press on the MODE until the desired mode is shown on the screen.
2.
In P-mode, press the MAX button to switch between the low and high heating capacity.
3.
In M-mode, press the heat capacity button to switch between the low and high heating
capacity.
Manual function
1.
Set the capacity at which the heater will work using the plus and minus button. The 2
suns indicate whether the heater is set to low or high capacity.
Program function
1.
Set the desired temperature for the device using the plus and minus button.
2.
Set the heating capacity (low - high) using the Mode button on the control panel or the
Max button on the remote control.