27
CAUTION
Make sure to use suitable fastening materials, depending on the surface.
Never block the space between the device and the wall.
12.
Place the device on a vertical and solid
surface. Use a spirit level when placing the
device (Figure 7, pos. 1).
13.
Place the device with a minimum distance
(Figure 7) of:
•
150 cm from the ceiling;
•
30 cm from the side walls;
•
30 cm from the floor;
•
50 cm clearance on the front side.
14.
Do not mount the device:
•
immediately below a socket outlet;
•
on a ceiling or roof.
Figure 7
15.
Drill two holes with approximately 160 mm
between the holes (Figure 8, pos. A). And
with a minimal distance from the floor of:
•
Alutherm Sani 800: 773 mm;
•
Alutherm Sani 1200: 918 mm.
16.
Place wall plugs (Figure 8, pos. 2).
17.
Screw two large screws (Figure 8, pos. 3) to
the wall using a Phillips screwdriver (Figure 8,
pos. 1). Let the screws stick out a few
millimeters from the wall.
Figure 8