EUROM 248234, Инструкция по эксплуатации

Страница: 43 / 63

44
- Place the brush on the axle. Turn the wing-nut until tight on the axle while
keeping the axle lock depressed.
- Release the axle lock.
Please note! Before you secure or change a brush, always turn the weed
brush off and remove the battery from the battery holder. Wear protective
gloves during assembly.
Adjusting angle of brush head
- Hold the weed brush securely
- Press the locking button to set the angle (see image C)
- Set the angle of the brush button to the required position
- The brush head can be set to 5 different positions (-36°, -
18°, 0°, 18°, 36°)
- Release the locking button and check to ensure the brush
head is locked.
Adjusting the length of the telescopic rod
- Unscrew the lower part of the locking screw (see image
D).
- Adjust the length of the telescopic rod
- Secure the locking screw again
Charging the battery
The battery must be charged before the weed cleaner can be used.
After you have first charged the battery, use the weed cleaner until the battery has
fully been de-charged. Repeat this 4 to 5 times.
- Place the battery charger on a solid underground and place the plug in a
220/240 Volt 50 Hz socket.
- The red light on the battery charger now
lights up.
- Slide the battery delivered with the weed
cleaner in the battery charger until you
hear a click. (the metal plates of the
battery charger in the grooves on the
battery )
- One red light on the battery starts lighting
up to indicate that the battery is being
charged. (potential lights other than the
red light on the battery indicate the
charging level). The green light also starts lighting on the battery charger to
indicate that it is being charged. If no lights appear then the battery has not
been placed in the battery charger correctly.
- When the battery has been charged in full then the red lights disappear on the
battery and the red light of the battery charger also disappears. The green light