manualshive.com logo in svg

Eurolux HBE 2I2G FV, Инструкции по эксплуатации и монтажу, Страница: 23 / 32

Поделиться
Скачать
Eurolux HBE 2I2G FV Скачать руководство пользователя страница 23

Safety switch off function:

       Every cooking zone will be switched off after a defined maximum operation time if the 

heat setting is not modified. Every change in the cooking zone puts back the maximum 

operation time to the initial value of the operating time limitation. The maximum operation 

time depends on the selected temperature level.

Child Lock:

After switching on the control, the child lock function can be activated. To activate the child 

lock, simultaneously operate the 

        and 

decrease heat setting 

key       and then operate the 

        again. "

L

" meaning LOCKED will 

appear in all heater displays and the control can not be changed. (If a cooking zone is in the hot 

condition, "

L

" and "

H

" will be displayed in alternation.)

The hob will remain in a locked condition until it gets unlocked, even if the control has been 

switched off and on.

To deactivate the child lock, first switch on the hob. Simultaneously operate the 

        and 

decrease heat setting

 key       and then operate the 

decrease heat 

setting 

key          again. "

L

" will disappear in the display and the hob will be switched off. 

Key Lock

Key lock functionality is for blocking and set the appliance into a save modus during operation. 

Touch modifications as for example rise heat settings and others should not be possible. It is 

only possible to switch the appliance off.

The lock function is active, if the Key Lock button        is pressed at least 2 sec. This operation is 

acknowledged by a buzzer. After successful operation of more than 2 sec, the Key Lock Indicator 

flashes and the heater is locked.

right increase heat setting key

right increase heat setting key

right increase 

heat setting key

Heat setting

Safety switch off after

1 - 2

3 - 4

5

6 - 9

6 Hours

5 Hours

4 Hours

1,5 Hours

 USE OF YOUR PRODUCT

22

Содержание HBE 2I2G FV

































Отзывы:

Нет отзывов