SPECIFICATIONS
F12B / CH / W attachments:
If the external flexible cable or cord of this luminaire is damaged, it should be exclusively replaced
by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
must be carried out by a qualified electrician, in accordance with SANS 10142. On completion
of installation, ensure that the Certificate of Compliance is updated.
• Before connecting this fan, ensure that voltage indicated on the rating label corresponds with
the mains voltage in your home.
• When cleaning, ensure that the power is turned off.
• This fan is checked in full for conformity to the quality standards and safety requirements.
• The manufacturer / supplier is not responsible for any damage of properties and persons,
caused by the incorrect use or installation of the fan.
• Should you be unsure of how to install this fan correctly, please consult a professional
electrician or your supplier for assistance.
• Ensure all items/ components, threads and screws are tightly secured.
IMPORTANT:
• Tampering with this fan, I.E. Using silicon sealers or incorrect cabling, will invalidate your
warranty. If one is not supplied within the carton, DO NOT use a solid speed control.
• Each blade set supplied is weighted and a complete set. If installing more than one fan,
DO NOT mix or add blades as this can cause your fan to wobble.
• Please check whether the connection of the power cord is safe and reliable before installation.
• Always ensure that the mains supply voltage is correct.
• Do not use the fan outdoors, in wet conditions or areas of high humidity.
• Do not insert objects or fingers through the bars of the grill.
• Always unplug the fan when cleaning or moving from one location to another.
• Always ensure that the fan is on an even, stable surface.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
IMPORTANT SAFEGUARDS
• The fan is operated by pull wall control:
High Speed
Medium Speed
Low Speed
Off
• Note: Fans move during operation which may cause some connections to come loose.
Check the supporting screws, brackets and blade attachments twice a year to ensure they are secure.
OPERATION
CLEANING
• Before cleaning always ensure the power supply is turned off and that the fan has been unplugged.
• Do not immerse the fan in water.
• No abrasive products, solvents, detergent may be used to clean this fan.
• Ensure that the fan does not come in contact with corrosive chemicals, etc.
• The motor bearings are permanently sealed and do not require additional lubrication.
• Fitting Material:
Pressed Steel
• Motor:
60W
• Voltage:
220 - 240V~ 5060Hz
• Protection against electric shock:
Class 1. Requires earth connection
• IP Rating:
20. Protected against solid foreign objects of 12.5mm Ø and greater, not protected
against water.
• Not for outdoor use or in wet conditions and areas of high humidity.
• Dimensions:
(H)340mm x (Ø)1220mm
• Features:
3 Speed
• Number of
Blades
:
3 Blades
Wall controller
2 Years Warranty
TROUBLE SHOOTING
CAUTION: Ensure power supply is turned off before attempting trouble shooting.
NOTE: This fan does not contain serviceable parts. DO NOT OPEN or TAMPER WITH THE MOTOR.
Should your fan not start:
1) Check fuses are in place in the switchboard.
2) Recheck the terminal strip connections.
3) Ensure the wall & direction switches are not stuck in a “middle” position. Should your fan be noisy:
1) Check all screws are sufficiently tight: fan blades and fan holders, (if applicable) glass of the lamp
holder.
2) Allow at least 24 hours for the fan to settle.
Should your fan wobble:
In general, wobble is caused by the blades not cutting the air at the same point. Measure downwards
from the ceiling and make sure each blade is at the same height to the ceiling. See Figure 1. If they
are not, adjust by hand by slightly bending the blade and bracket.
If a major adjustment is needed, insert a washer as shown in Figure 2.
1) Check the blades are securely fastened to the holders.
2) Check the blade holders are tight on the motor.
3) Ensure the mounting bracket is properly screwed to the ceiling.
4) Interchange opposite blade sets if needed.
Should the light on your fan not work:
1) Check the terminal connections are tight.
2) Check if the lamp is blown.
Should the above fail, contact a qualified electrician for assistance.
Touching
Ceiling
Figure 1
Figure 2
Blade Brackets
Blade Tip Down:
Fan Blade
Blade Tip Down:
Fan Blade
Fan Wobbles:
