background image

Warning:

 Use only those rinse aid materials which are allowed for use in the machine. As rinse 

aid residues left as a result of overflowing will create extremely high amounts of foam and thus 
reduce the washing performance, remove the excess amount of rinse aid by wiping it with a rag. 

 

If you properly place your dishes into the machine, you will be using it in the best way in terms 
of energy consumption, washing and drying performance. 
There are two separate baskets for you to load your dishes into your machine. You can load into 
the lower basket such round and deep items as pots with long handles, pot lids, plates, salad 
plates, cutlery sets. 
The upper basket has been designed for tea plates, dessert plates, salad bowls, cups and 
glasses. When placing long-stem glasses and goblets, lean them against the basket edge, rack 
or glass supporter wire and not against other items. Do not lean long glasses against one 
another or they cannot remain steady and may receive damage. 
It is more appropriate to locate the thin narrow parts into the middle sections of baskets.  
You can place spoons among the other cutlery sets in order to prevent them from sticking to 
one another. You are recommended to use the cutlery grid in order to obtain the best result. 
To avoid any possible injuries, always place such long-handle and sharp-pointed dishes as 
serving fork, bread knife etc. with their sharp points facing down or horizontally on the baskets.  

 

Warning:

 Place your dishes into your machine in a way that they will not prevent the upper and 

lower spray arms from spinning. 

 

Top basket height adjustment 

Top basket of your machine is in upper position. When it is in this position, you can place big 
items such as pans, etc. on lower basket. When you take top basket to lower position, you can 
place and wash big sized plates on the top basket.  
Use wheels in order to change the basket height. Open the basket retaining parts at the end of 
top basket rails by turning them to the sides, and take the basket out. Change the position of the 
wheels; reinstall the basket to the rail, and close basket retainer parts. In this way, you take the 
top basket to lower position. 

 

LOADING YOUR DISHWASHER 

16

 

 

 

Top basket 
Height Adjustable Rack 

These racks are designed to increase the capacity of the 
top basket. You can place your glasses and cups on the 
racks. You  can  adjust  the  height of  these  racks.  Thanks 
to  this  feature,  you  can  place  different  sizes  of  glasses 
under these racks.  
Thanks  to  height  adjustment  plastics  mounted  on  the 
basket,  you  can  use  your  racks  in  3  different  heights.  In 
addition, you can place long forks, knives and spoons on 
these  racks  laterally,  so  that  they  do  not  block  the 
revolution of propeller.   

Содержание DW10V-AAA-8































Отзывы: