USER MANUAL
21
In folder ANIMA folder, there are 3 ild file show. They are ANIMA1.ild,
ANIMA2.ild, ANIMA3.ild. If you want to do a preprogram show with
them, you should do the TXT files as:
ANIMA1.ild,12,3
ANIMA2.ild,20,1
ANIMA3.ild,18,4
Save this TXT file with name ANIMA.TXT, change the file name from
ANIMA.TXT to ANIMA.PRG
IMPORTANT NOTES: “ANIMA1.ild” is t he ild show name, “12” is
scanner speed, “3” is how many times you want this show to repeat.
DMX MODE
Press FUNC to enter MODE OPTION
Till to DMX address shown on LCD monitor.
Press UP/DOWN to change the DMX
address that you wanted.
Press ENTER to confirm the laser
to show the present mode at the
next operation.
Attention When the laser is connected with DMX controlled or under
control by DMX signal, the DMX indicated LED on front
panel is in RED.
