www.eurolite.de
Item 51860120
5
Select
Browse my computer for driver
software.
6
Click
Browse-
and select the driver file
USB-
DMX512 Pro.inf
. Then click
OK
and
Next
.
7
Confirm the warning
Install this driver software
anyway
. Then
Close
the screen.
8
The driver has been successfully installed and the
device manager no longer indicates a warning.
The interface is now ready for operation.
Using the FreeStyler Application
The interface is fully supported by FreeStyler as of
version 3.37. FreeStyler is available as freeware under
www.freestylerdmx.be
.
Select
EUROLITE USB-DMX512 PRO
from the list in
the Interface Setup of the application and the
corresponding COM port. Open the device manager to
find out which COM port the interface uses. For further
information, please refer to the application’s
documentation.
Adjusting the COM Port
In case of conflicts between ports or if the software
used requires a certain range, you can adjust the COM
port.
1
Open the device manager where the interface is
listed as
USB Serial Port
under Ports (COM &
LPT). Double-click this port. This will bring up the
Properties
. Select the
Port Settings
tab and
click
Advanced...
2
Select a free COM port and confirm with
OK
.
