EuroLite TMH XB-280, Руководство пользователя

Страница: 34 / 40

00127924, Version 1.0 34/40
DMX operation
Setting the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 19 control channels.
However, it can also be switched to a mode with 16 channels if different functions are required. To be able to
operate the device with a DMX controller, the DMX starting address must be set. The starting address
depends upon which DMX controller is being used. Please refer to the controller’s documentation.
1 Press the OK button until the display is lit and you can select Set with the OK button. Confirm with the
OK
button.
2 Press the OK button so many times again until DMX address is indicated on the display. Confirm with
the OK button.
3 Use the buttons UP and DOWN to set the address. Confirm with the OK button.
4 In order to set the desired DMX channel mode, Press the OK button so many times again until Channel
mode is indicated on the display. Confirm with the OK button.
5 Use the buttons UP and DOWN to set the desired DMX channel mode: 16 CH (16 DMX channels) or 19
CH (19 DMX channels). Confirm with the OK button.
6 With the MENU or ENTER buttons, you can return to the main menu.
7 The DMX Mode control indicator next to the display will light up when DMX signals are being received.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
The color- and gobo-wheel positions of the following DMX protocol are arranged as shown in the
graphic.
Static gobo-wheel
Gobo 1
Offen/
Open
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo 8
Gobo 9
Gobo 10
Gobo 11
Gobo 12
Gobo 13
Color-wheel
Red
Orange red
Magenta
Orange
Light blue
Blue
Yellow
Warm white
Purple red
Green
Pink
Light yellow
Light green
Cold white
Open