00095594, Version 1.2
20/28
rear
(4)
Power supply with fuseholder
(5)
Microphone
(6)
LED Display with programming buttons
(7)
DMX-In plug
(8)
Power out
(9)
Rubber feet
(10)
Mounting brackets
(11)
DMX-Out socket
INSTALLATION
Rigging
The device can be installed on the ground or on the wall or ceiling.
Overhead rigging
DANGER TO LIFE!
Please consider the valid standards and national regulation during the installation!
The installation must only be carried out by an authorized dealer!
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
MIC
UP
DOWN
ENTER
MODE
LED SLS-603 TCL + UV Floor
10
~ 20
No. 51915358, EAN
0-240V 50/60Hz
W T1 /250V
4026397561692
A
Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5
97297 Waldbuttelbrunn Germany www.steinigke.de
0.1m
T =45°C
a
T =60°C
C
4
5
6
7
8
9
10
11