EuroLite PFR-50, Руководство пользователя

Страница: 20 / 24

00138663, Version 1.0
20/24
OPERATION
With the power switch, you can switch the device on and off.
After connecting the device to the mains it is ready for operation.
The device has two operating modes. It can be operated in stand-alone mode via LED display with operating
buttons or alternately in DMX-controlled mode via lighting controller.
DMX-Interface (optional accessory)
The DMX-Interface for the LED PFR-50 WW Fresnel
Spot adds full DMX functionality to the spotlight and
allows the addressing and setting via control board with
LED display and four operating buttons.
Connect the DMX-Interface with the device via the USB
port. (The appropriate connection cable is included with
the delivery of the DMX-Interface.)
Control Board
The Control Board offers several features: you can easily set the starting address
or run a demo program.
Browse through the menu by pressing UP or DOWN. Press ENTER in order to
select the desired menu. You can change the selection by pressing UP or
DOWN. Press ENTER in order to confirm. You can leave every mode by pressing
ESC. The functions provided are described in the following sections.
Stand-alone Mode
In stand-alone mode, the LED PFR-50 WW Fresnel Spot with the DMX-Interface can be used without controller.
Disconnect the device from the controller.
Menu structure
Mode
Display
Function
DMX mode A001
r001-511 DMX address setting
Master/Slave mode MASt On/off Master device setting
Internal programs dEMO SC00 – SC02 Program 0 - 2
Dimmer U000 M000 – M255 Dimmer intensity 0 – 100%