EuroLite NSF-250, Руководство пользователя

Страница: 20 / 24

www.eurolite.de
20
Menu Settings
Menu Structure
Mode Programming Levels Function
LED colors
CH-1, CH-2,
CH-3, CH-4
oFF LEDs off (default)
rAnd Automatic color change
Co1-Co9 Constant lighting (color 1 to 9)
Fluid sensor oiL
on Sensor on
oFF Sensor off
Operating Buttons
Button Function
MODE Selecting menu items
ENTER Editing menu items and confirming settings
▲/▼ Setting values
LED Color Settings
Menu items CH-1 to CH-4 correspond to the remote control’s trigger buttons 1 to 4. It is possible to adjust an
individual LED color setting for each of the four buttons.
1
Press the MENU button so many times until the desired menu item is indicated: CH-1 , CH-2 , CH-3 or
CH-4 .
2
Press ENTER .
3
Use the buttons ▲ and ▼ to make your setting: rAnd = automatic color change or Co1-Co9 = constant
lighting in one of nine colors. Select oFF to turn off the LEDs for the trigger button.
4
Confirm with ENTER .
5
Repeat steps 1 to 4 to configure the other buttons.
Switching the Fluid Sensor on and off
To protect the pump, the machine uses a fluid sensor to test if there is smoke fluid in the tube. If the sensor
detects not enough fluid in the tube, the machine will enter a protection mode after about 10 seconds and
shuts the pump down. The display will start flashing.
To set the sensor, press the button MENU until the display indicates “ oil “. Then press ENTER to make your
settings. Use the buttons ▲ and ▼ to deactivate the fluid sensor (indication “ off ”) and to reactivate it
(indication “ on ”). Once again, press ENTER to confirm your settings.
Note, however, that this sensor is a very important protection mechanism. For proper operation,
it should be activated.