19
•
EN
Menu structure
Mode
Display
Function
Warming up phase
Warming Up
The machine is warming up and not ready for use before
the required operating temperature has been reached
Home screen
Ready To Fog
The warming up phase has been completed and the
device is now ready for use. Press ENTER button to return
to home screen anytime (except when in DMX mode)
Operation settings
Interval Set
1-200s
Adjust time interval under timer mode
Duration Set
1-200s
Adjust duration under timer mode
Timer Out
1-100%
Adjust fog output volume under timer mode
Volume Out
1-100%
Adjust fog output volume under manual mode
Display
on/off
Activate/deactivate display energy-saving mode after
1 minute of inactivity
DMX settings
DMX512
Address
001-512 Set DMX starting address
Fluid sensor
Fluid Sensor
on/off
Activate/deactivate fluid sensor
TIMER OPERATION
Timer mode makes it possible to manually configure the fog output volume between 1% and 100%, as well as the
output duration and the interval at which the output is to begin. Use the MENU button to select the “Timer Out”,
“Duration Set”, and “Interval Set” menu items, and set the desired value using
▼ and ▲
respectively. After
finishing the above setting, go back to the home screen by pressing the ENTER button.
MENU
Interval Set
/
Duration Set
/
Timer Out
▼ and ▲
▼ and ▲
▼ and ▲
1-200S
1-200S
1-100%
To activate Timer Mode, press the
▲
/ TIMER key below the display. To deactivate Timer Mode, press ENTER /
STOP.
MANUAL OPERATION
To operate the machine in Manual Mode, confure the the fog output volume between 1% and 100%. Select the
“Volume Out” menu option with the MENU button and set the desired value using
▼ and ▲
. Then go back to the
home screen by pressing the ENTER button.
MENU
Volume Out
▼ and ▲
1-100%
To activate Manual Mode, press the
▼
/ VOLUME key below the display. To deactivate Manual Mode, press
ENTER / STOP.
Note
•
In manual mode, the machine emits fog continuously until a re-heat is needed.
