00094808.DOC, Version 1.0
26/30
LOAD
Restore factory settings
With this function you can restore the factory settings of the device. All settings will be set
back to the default values (shaded).
• Select
“LOAD”
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
, the display shows
“OFF”
.
• Press
[UP]
to select
“ON”
if you wish to enable this function or
[DN]
to select
“OFF”
if you
don’t.
• Press
[ENTER]
to confirm.
• Press
[MODE]
in order to return to the main menu.
VER
Software version
With this function you can display the software version of the device.
• Select
“VER”
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
, the display shows
“X.X.XX”
, “X.X.XX“ stands for the version number, e.g.
“1.0.0”, “2.6.0”.
• Press
[ENTER]
to confirm.
• Press
[MODE]
in order to return to the main menu.
UI
Hibernation - power standby mode
With this function you can put the device in the power standby mode. This function will be
automatically activated after a predefined period of time of no DMX activity. In standby mode
the lamp/LEDs and all motors will power down if no DMX signal is sent to the fixture for a
period of e. g. 15 minutes (can be user defined). The fixture will automatically reset and
return to normal operation once a DMX signal is sent.
• Select
"HIBE"
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
to confirm, the display shows
“XXM”
or
"ON"
. "X" stands for the minutes.
• Press
[UP]
or
[DN]
to select
"1-99M"
for the desired time – or
"ON"
to deactivate this
function.
• Press
[ENTER]
to confirm.
• Press
[MODE]
in order to return to the main menu.
Backlight
With this function you can shut off the display after 1 to 99 minutes.
• Select
"BACK"
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
to confirm, the display shows
“XXM"or "ON"
. "X" stands for the minutes.
• Press
[UP]
or
[DN]
to select
"1-99M"
for the desired time – or
"ON"
to deactivate this
function.
• Press
[ENTER]
to confirm.
• Press
[MODE]
in order to return to the main menu.
Reverse display
With this function you can rotate the display by 180°.
• Select
"FLIP"
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
, the display shows
“OFF”
.
• Press
[UP]
to select
“ON”
if you wish to enable this function (the display will rotate by
180°) or
[DN]
to select
“OFF”
if you don’t.
• Press
[ENTER]
to confirm.
• Press
[MODE]
in order to return to the main menu.
MIC
Mic sensitivity
With this function, you can select the desired microphone sensitivity between 80 % and 88
%.
• Select
"MIC"
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
to confirm.
• Press
[UP]
to select the desired sensitivity.
• Press
[ENTER]
to confirm.
• Press
[MODE]
in order to return to the main menu.