00094808.DOC, Version 1.0
24/30
Control Board
The Control Board offers several features: you can simply set the starting address or run the pre-
programmed program.
The main menu is accessed by pressing the Mode-button. Browse through the menu by pressing Up or
Down. Press the Enter-button in order to select the desired menu. You can change the selection by pressing
Up or Down. Confirm every selection by pressing the Enter-button. You can leave every mode by pressing
the Mode-button. The functions provided are described in the following sections.
Default settings shaded.
Main
menu
Sub
menu
Extension
Function
MODE
ADDR
XXX
DMX address setting /
DMX controlled mode
SUND
Internal sound controlled program
(Master Mode)
SEQ1
Internal program 1
(Master Mode)
SEQ2
Internal program 2
(Master Mode)
SET
COLO
ADCL
OFF/1-15
Static colors
RED
0-255
Dimmer intensity of
LED colors
000 – 255 (increasing)
GREE
0-255
BLUE
0-255
WHIT
0-255
MOTO
0-255 Movement
LOAD
ON/OFF
Restore factory settings
VER
X.X.XX
Software
version
UI
HIBE
01M-99M, ON
Standby mode
BACK
01M-99M, ON
Display shutoff time
FLIP
ON/OFF
Display reverse 180°
MIC
80~88%, 85%
Mic sensitivity
INFO DRIT
XXXC
Temperature near LED driver
LAMP
TEMP
80-130°C,90°C
LED off at temperature
ADJU
CHxx=XXX
Service
function
MODE
• Press
[MODE]
to enter the main menu
"MODE".
• Press
[ENTER]
and select
ADDR
,
SUND,
SEQ1
or
SEQ2
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
for selecting the desired sub menu.
DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
• Select
“ADDR“
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
, adjust the DMX address by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
to confirm.
• Press
[MODE]
in order return to main menu.
Internal sound controlled program, Master setting
With this function, you can run the internal program sound-controlled.
• Select
"SUND"
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
to confirm.
• Press
[MODE]
in order to return to the main menu.