EuroLite LED PST-9W, Руководство пользователя

Страница: 13 / 17

13 • EN
OPERATING ELEMENTS AND CONNECTIONS
SETUP
Placing the unit
Fasten the device to a wall or ceiling with the mounting bracket. Always choose screws and plugs which are
suitable for use in your wall/ceiling and have enough holding power. Fasten the device in such way that it will not
fall down.
Connection to the mains
The device uses an auto-range power supply that accepts input voltages between 100 und 240 volts. Connect the
device via the mains cable to a grounded mains socket. Thus the unit is switched on. To switch off the unit,
disconnect the power plug. Notes: Do not connect the unit to the mains voltage via a dimmer. For a more
convenient operation, use a mains outlet which is switchable.
Linking several devices
Several spots may be interconnected via the IN and OUT jacks, connection cables are included. Then all units can
be synchronized and controlled with one remote control.
IN OUT
1) RGB LED
2) Monting bracket
3) Fixation screw
4) 3.5mm jack connector to link
multiple devices
5) Power cord