EuroLite LED Pixel Mesh, Руководство пользователя

Страница: 18 / 27

16
Sender card installation
1) Turn off your computer and disconnect from the powersource. Always take these precautions before
opening the case and adding/removing components.
2) Insert the sender card into an available PCI slot in your computer.
3) Connect the DVI output from your computer’s display card to the DVI input on the sender card,
Using the DVI signal cable provided.
4) Connect your computer’s serial RS232 (also known as COM port) connector to the 6-pin telephone
connector of the sender card, using the RS232 signal cable provided.
5) Connect the RJ45 OUT 1 connector to the controller’s Net IN connector with the provided net cable to
display rows 1 through 128.
6) When you want to display 256 row lines, connect the OUT 2 to a second controller.
7) Make sure that all connections are correctly connected, before applying power to the entire system.
8) In order to test the system successfully, it will be necessary to address the controllers correctly.
9) Once the controllers are assigned, turn on the computer and test the system.
Fig. 13
Warning
When your PC starts up and your screen stays black after connecting the sender card, turn off your
computer immediately and disconnect the DVI cable from the sender card. Reboot your PC and when
Windows has loaded, reconnect the DVI cable.