EuroLite LED PAR-64 QCL Short, Руководство пользователя, Страница: 21 / 23

00064094.DOC, Version 1.0 21/23
Internal Programs, Sound Control
Press the MODE button to select the internal program mode. When the display shows P , you can select the
desired internal program, with or without sound control, via the UP or DOWN buttons (see following graphic).
Mode: Value: Function:
P01
Endless loop in 7 colors,
change every 3 seconds
P02
Endless loop in 7 colors,
fade every 3 seconds
P03
Endless loop in 3 colors,
change every 3 seconds
P04
Endless loop in 3 colors,
fade every 3 seconds
P05
Endless loop in 7 colors,
via sound control
P06
Endless loop in 3 colors,
via sound control
P07
Endless loop in 15 colors,
change every 3 seconds
P08
Endless loop in 15 colors,
fade every 3 seconds
P
P09
Endless loop in 15 colors,
via sound control
Sound Control/Sensitivity
Press the MODE button until the display shows S . You can select the desired sensitivity via the UP or
DOWN buttons.
Mode: Value
S S01 - S99 (S50 default setting)
DMX MODE
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED PAR-64 QCL Short will respond to the controller.
Addressing
Press the MODE button until the display shows Add . You can now set the desired address via the UP or
DOWN buttons.
Setting the DMX Start Address:
Mode: Value:
Add 001 - 512
Controlling:
After having addressed the LED PAR-64 QCL Short, you may now start operating it via your lighting
controller.
Note:
It’s necessary to insert the XLR termination plug with 120 in the last lighting in the link in order to ensure
proper transmission on the DMX data link.