00122642.DOCX, Version 1.0
28/36
System settings
SYS
DISP
on
Display deactivation after 30 seconds
(default setting)
oFF
Display always on
DISR
on
Display reversed
oFF
Display normal (default setting)
IR
on
IR remote control activated (default setting)
oFF
IR remote control deactivated
FAIL
HOLD
Most recent DMX value is held
BLAC
LEDs are switched off (default setting)
SOUN
LAST
Most recent light effect is held
oFF
LEDs are switched off (default setting)
FOOT
on
Foot switch activated (default setting)
oFF
Foot switch deactivated
REST
YES
Reset to factory settings
NO
No reset to factory settings
Stand-alone mode
Automatic mode
In automatic mode, 20 different show programs are available that run at an adjustable speed.
1
Press the
MENU
button so many times until
AUT
for automatic mode is indicated in the display. Confirm
with the
ENTER
button.
2
Use
UP
and
DOWN
to select the number of the desired program. Confirm with
ENTER
. The display
indicates menu item brightness.
3
Use
UP
and
DOWN
to adjust the brightness of the program from
d.01
(dark) to
d.100
(bright). Confirm
with
ENTER
. The display indicates menu item running speed.
4
Use
UP
and
DOWN
to adjust the running speed of the program from
S.01
(slow) to
S.100
(fast). Confirm
with
ENTER
.
Sound control
Via the integrated microphone the unit can perfectly reproduce the 20 show programs to the rhythm of the
music (sufficient bass provided).
1
Press the
MENU
button so many times until
SOU
for sound control is indicated in the display. Confirm
with the
ENTER
button.
2
Use
UP
and
DOWN
to select the number of the desired program. Confirm with
ENTER
.
3
Use the rotary control
SENSITIVITY
to adjust the microphone sensitivity to the sound volume. In case of
missing sound signal, the LEDs are either switched off after 5 seconds or hold the most recent light
effect. This function can be found under the menu item
SYS > SOUN
.
Individual color mix
In the color mode
COL
each of the 6in1 LEDs can be individually adjusted for brightness. The spots will
constantly emit the color adjusted. Select
ALL
to adjust the brightness for all fixtures at the same time.
Select
ALON
to adjust the brightness for each spot individually.
1
Press the button
MENU
so many times until
COL
is indicated in the display. Confirm with the
ENTER
button.
2
Select the desired mode (
ALL
or
ALON
) using the
UP
and
DOWN
buttons. Confirm with
ENTER
.
3
In
ALL
mode, the display indicates the letter
R
for the color red and the corresponding brightness value.
4
Use the
UP
and
DOWN
buttons to adjust the desired brightness.
5
Confirm with
ENTER
. Now the color green can be adjusted; then blue, white, amber and UV.
6
The setting of the strobe speed is the final menu item. Use
UP
and
DOWN
to select the number of the
desired flash frequency from
S.01
(slow) to
S.100
(fast) or
S.00
(no flashing).
7
In
ALON
mode, first select the desired spot (
PAR1
,
PAR2
,
PAR3
or
PAR4
). Confirm with
ENTER
.
8
You can now set the brightness for each spot following the same steps as described above.
