EuroLite LED KLS-2500, Руководство пользователя

Страница: 31 / 40

00082823.DOCX, Version 1.0 31/40
7. OPERATION
After connecting the unit to the mains it requires a short initialization process and is then ready for operation.
The display shortly indicates the firmware version followed by the last operating mode. The light set may be
controlled via DMX controller or a foot pedal. Alternatively, it can be operated without external control in
sound-controlled mode or in automatic mode with processor-controlled color changes. The operating modes
can be selected by means of the display and the control buttons.
Button Function
MENU
Selects the next menu item.
Returns to the pervious menu level.
ENTER
Activates a value to be modified.
Saves a value when modifying.
UP
Selects the next menu item.
Increases values when modifying.
DOWN
Selects the previous menu item.
Decreases values when modifying.
Option Function
Auto Show Automatic mode with adjustable speed
Sound Show Sound control
Sensitivity Microphone sensitivity
Back Light Display on/off
Information Selftest, operating hours and firmware version
DMX Channel Number of DMX channels
DMX Address DMX start address
Master/Slave Operating mode master or slave
Note : Approx. 20 seconds after pressing the last button, the setting menu is automatically exited.
7.1 Operation without external control
Automatic mode
1
To select the automatic mode with processor-controlled color changes, press the button
MENU
so
many times until Auto Show is indicated in the display. Confirm with the ENTER button.
2
Once again, press the ENTER button to activate menu item speed. The display indicates Speed . Use
the buttons
UP
and
DOWN
to adjust the desired speed in automatic mode from low (0) to high (100).
Sound control
1
Via the microphone, which is integrated in the control unit, the rhythm of the music (sufficient bass
provided) can be perfectly reproduced by the light set. To select sound control press the button
MENU
so many times until Sound Show is indicated in the display. Confirm with the ENTER button.
2
To adjust the microphone sensitivity press the button MENU so many times until Sensitivity is
indicated in the display. Confirm with the ENTER button. Use the buttons UP and DOWN to adjust the
microphone sensitivity to the volume of the music from low (0) to high (100).
Master/slave operation with several light sets
When several light sets are interconnected (
→
6.5), the slave units can be synchronized and controlled with
the master unit. The units must be set to the corresponding operating modes.
1
Press the button MENU so many times until Master/Slave is indicated in the display. Confirm with the
ENTER button. Use the buttons UP and DOWN to select the option Master for the master unit and
Slave for each of the slave units.
2
At the master unit, select the desired operating mode (automatic mode or music control). The
interconnected light sets will now operate in sync.