00092593, Version 1.1
17/18
DMX Operation
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED FL-1500 Flamelight with DMX will respond to the controller.
Every DMX channel has a different occupation with different features.
Addressing
Press the MODE button until the display shows
ADDR
and press the ENTER button.
Set the desired address (between 001 und 512) via the UP or DOWN buttons.
Press ENTER in order to confirm
Controlling:
After having addressed the device, you may now start operating it via your lighting controller.
Choosing a DMX Channel Mode (2 optional modes)
After having set the desired address(es) and pressed ENTER, you can now choose a DMX Channel Mode.
Press the MODE button until the display shows
CHND
and press the ENTER button.
Via the UP or DOWN buttons, you can choose between the DMX modes “3 CH and 6 CH”.
Please see the following DMX protocol graphics for the respective channel values.
DMX-Protocol
3-Channel mode:
Channel DMX-Value
Function
1
000-255
Red (0 - 100 %)
2
000-255
Green (0 - 100 %)
3
000-255
Blue (0 - 100 %)
6-Channel mode:
Channel DMX-Value
Function
1
000-255
Red (0 - 100 %)
2
000-255
Green (0 - 100 %)
3
000-255
Blue (0 - 100 %)
4
000-015
No function
016-255
Auto program, increasing speed (0 - 100 %)
5
000-015
No function
016-255
Strobe, increasing speed (0 - 100 %)
6
000-255
Dimmer (0 - 100 %)
Note
: In order to change from DMX-controlled operation back to stand-alone operation, please disconnect
the device from the DMX-controller.
