00040337.DOC, Version 1.1
8/15
Caution:
Never touch the lightchain during operation.
If there are reasons for supposing that risk-free operation is no longer possible, the lighting chain must be
deactivated and protected against accidental operation. Risk-free operation can no longer be supposed
when the lighting chain
• no longer functions
• is visibly damaged
• has been stored long-term under adverse conditions, or
• has been exposed to stress during transport.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
Keep away children and amateurs!
OPERATING DETERMINATIONS
This device is a lighting chain for creating decorative effects. This product is allowed to be operated with an
direct current of 12 V.
The device must only be operated with an appropriate power unit suitable for the power consumption.
The lighting chain is protected against splashing water (protection-degree IP44) and can therefore be used
inside and outside.
Do not shake the device. Avoid brute force when installing or operating the device.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
The symbol
- - -m
determines the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than 0.1 meters.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.
INSTALLATION
Unpack the lighting chain and unroll it.
Install the lighting chain at the desired installation-spot.
Connect the connection cable of the lighting net with the transformer. Plug the transformer into your outlet.
Make sure that the outlet is in a dry area.
The lighting chain must never be covered with any object.
Please note that the LED Deco-Light with 15cm LED distance has to be connected every 300 LEDs and the
LED Deco-Light with 30cm LED distance has to be connected every 600 LEDs.
How to connect several lighting chains:
Disconnect from mains!
Make sure that you only connect 12 V-versions.
