00079614.DOCX, Version 1.7
23/28
6. OPERATION
Switch on the unit with the rear power switch.
Unlocking Program Mode
Before you can start programming you need to unlock the program mode.
Press and hold the
RECORD
button.
Press the
FLASH
buttons
1, 6, 6, 8
of Preset A.
Release the
RECORD
button.
The red LED above the
RECORD
button lights up and the program mode is unlocked.
2 x 24 Channel Preset
With the Scene Setter you can adjust two different scenes in Preset A and Preset B and fade from one to
another via the
MASTER
fader.
Press the
MODE SELECT
button, until the
A DOUBLE/PRESET B
LED lights up.
Push Fader
MASTER
A to maximum.
Push channel faders of
PRESET A
to the desired setting.
Pull the
MASTER B
fader to maximum.
Push channel faders of
PRESET B
to the desired setting.
Fade from Preset B to Preset A by pushing up faders
MASTER A
and
MASTER B
.
In Double Preset mode, the buttons over the master faders can be used as flash buttons.
Switching the Dimmer Display
The dimmer display can be switched from percent to the DMX value.
Press and hold the
RECORD
button.
Press the
INSERT
button and the display switched to the DMX value (0-255).
In order to switch the display back to percent, repeat the procedure.
Memorizing Scenes
With the Scene Setter you can memorize up to 96 different scenes with 48 channels (Page 1 to Page 4).
Press the
MODE SELECT
button, until the
1-48 SINGLE/PRESET PARK
LED lights up.
Push the fader
MASTER A
to maximum.
Push channel faders to the desired setting.
Press the
RECORD
button.
Press and hold the
RECORD
button and press the desired
FLASH
button of PRESET B.
The scene is now memorized on this fader.
Calling Up Scenes
Press the
MODE SELECT
button, until the
CHASE/SCENES
LED lights up.
Pull all
channel faders
to minimum.
Push the fader
MASTER A
and the
FADE TIME
fader to maximum.
Push the
channel fader
of the desired scene in PRESET B to maximum.
The scene will be called up.
